Operation Of The Leds - ADEUNIS ARF8230AA Guide Utilisateur

LoRaWAN 863-870 Pulse - Guide utilisateur / User guide version V2.0.0

2.3. Operation of the LEDs

Mode
Transmission of frame (TEST
mode only)
Reception of frame (TEST mode
only)
Product in Park mode
Magnet detection process (1 to
6 seconds)
Product start (after detection of
the magnet)
Joining process (Lora product)
Switching to the Command
mode
Battery level low
Product faulty (return to facto-
ry)
Product in production mode
(TEST mode only)
Product in REPLI mode
LED red state
ON during the reception of a
downlink frame
OFF
OFF
OFF
During the JOIN phase: flashing:
50ms on / 1 s off
If the JOIN phase is complete
(JOIN accept):
flashing: 50ms on / 50ms Off
(6x)
Continuously lit
Flashing (0.5s ON every 60s)
Fixed ON
50ms ON / 30 s OFF
Flashing (100ms ON / 100ms
OFF) x 2 every 5s
LED green state
ON during the transmission
cycle
OFF
ON from detection of the mag-
net up to a maximum of 1
second
Rapid flashing 6 cycles, 100 ms
ON / 100 ms OFF
During the JOIN phase: flash-
ing: 50ms on / 1 s off (just
after the red LED)
If JOIN phase is complete (JOIN
accept):
flashing: 50ms on / 50ms off
(just before the red LED)
Continuously lit
50ms ON / 30 s OFF (just be-
fore the red LED)
FR
EN
Page 75 of 108