Safety Instructions For Auto Hammer - Skil PWRCORE 12 AH6552A-00 Guide D'utilisation

Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts . This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs . Service of battery packs should only be performed
by the manufacturer or authorized service providers.
SAFETY WARNINGS FOR AUTO HAMMER
Wear ear protectors . Exposure to noise can cause hearing loss.
Hold power tools by the insulated gripping surfaces when performing an operation
where the tool may contact hidden wiring . Contact with a "live" wire will also make exposed
metal parts of the tool "live" and shock the operator.
Do not insert or try to insert your finger into the hammer sleeve at any time, failure to do
so could result in personal injury. Your finger may get hurt.
Do not stare into the LED worklight directly; never direct the worklight into others' eyes.
Never put your hand continuously on the nail when hammering . Only use your hand to
root the nail on the workpiece at the beginning of hammering.
This auto hammer is suggested to be used for the nails with length no more than 3-1/2
inches / 89 mm (Penny Size: 16d).
Use clamps or another practical way to secure and support the workpiece to a stable
platform before hammering . Holding the work by hand against your body leaves it unstable
and may lead to loss of control.
Know your power tool . Read operator's manual carefully . Learn its applications and
limitations, as well as the specific potential hazards related to this tool . Following this rule
will reduce the risk of electric shock, fire or serious injury.
Battery tools do not have to be plugged into an electrical outlet; therefore, they are
always in operation condition . Be aware of possible hazards when not using your
battery tool or when changing accessories . Following this rule will reduce the risk of electric
shock, fire or serious personal injury.
Do not place battery tools near fire or heat . This will reduce the risk of explosion and
possibly injury.
Do not charge battery tool in a damp or wet location . Following this rule will reduce the risk
of electric shock.
For best results, your battery tool should be charged in a location where the
temperature is more than 32℉(0℃) but less than 104℉(40℃). Do not store outside or in
vehicles .
Save these instructions . Refer to them frequently and use them to instruct others who may
use this tool. If you loan someone this tool, also loan them these instructions,
5