Specifications - Sharp LL-T2000A Mode D'emploi

Product specifications
LCD display
50 cm measured diagonally
Anti Glare Low Reflection TFT LCD module
Resolution (max.)
UXGA 1600 x 1200 pixels
Displayable colors (max.)
16.77 million colors (8 bit)
Brightness (max.)
200cd/m 2
Dot pitch
0.249(H) 0.249(V) mm
Contrast ratio
300:1
Angle of visibility
Left-right 150°; Up-down 150°
Screen display size
Horizontal 398.4 mm x Vertical 298.8 mm
Video signal
Analog RGB (0.7Vp-p) [75Ω]
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital screening (enlargement of display to
correct VGA/SVGA/XGA/SXGA)
Plug & Play
VESA:
Power management
VESA:
Computer signal input terminal
2 x 15 pin mini D-sub (3 rows)
USB hub function
1 upstream port, 2 downstream ports (bus-
powered hub based on USB standard Rev 1.1)
Screen tilt
Upward 0° -30°; downward 0° - 5°
Screen swivel
90° from left through right
Power supply
AC100-240V 50/60Hz (Use special AC adapter,
type NL-A51J of Sharp Corporation.)
Temperature of operating environment
5 - 35°C
Power consumption
48W max. (3.5W when in power-saving mode)
(Use special AC adapter.)
Dimensions (W x D x H, excluding rubber base)
483 mm x 218 mm x 478 mm
Weight
Approx. 10.5 kg (excluding AC adapter)
Downloaded from: http://www.usersmanualguide.com/
DDC1/DDC2B compatible
based on DPMS

Specifications

Dimensions (Units: mm)
Special AC adapter
Approx. H 140 mm x D 70 mm x H 41 mm
25
483
227
73
Approx.1.8m