2.1 Scope of delivery
Included in the delivery:
Car Finder 2.0 by PAJ
M2M SIM card (is already inserted/ do not
replace)
Note: The latest version of this manual is available
www.paj-gps.de/finder
The PAJ-GPS team wishes you lots of fun with your
Car Finder 2.0!
2.2 Product graphics
LED battery status
at:
OBD interface
LED signal status
Car Finder 2.0 by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
2.3 Supported OBD Protocols
Before using the FINDER in your car, please check if
your car supports the following protocols:
ISO 9141-2
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
2.4 Activation
Note: To activate you need the device ID. Please
make a note before installing your FINDER.
In order to use PAJ's Car Finder 2.0, it must first be
activated online.
To do this, please go to
www.start.finder-portal.com
and follow the instructions.
15