Preparing The Smartclean System For Use - Philips 9000 Série Mode D'emploi

Preparing the SmartClean system for use

Do not tilt the SmartClean to prevent leakage.
Note: Hold the SmartClean while you prepare it
for use.
1 Put the small plug in the back of the
SmartClean system.
2 Put the adapter in the wall socket.
3 Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2).
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the SmartClean
system.
6 Push the top part of the SmartClean system
back down ('click').
ENGLISH
25