Stihl HTA 65 Notice D'emploi page 54

English
Remove the cap.
N
Filling up with chain oil
Filling up with chain oil
N
Take care not to spill chain oil while
refilling and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for chain oil (special
accessory).
Closing
Grip must be vertical:
Fit the cap – marks on filler cap and
N
oil tank must line up.
Press the cap down as far as stop.
N
52
While holding the cap depressed,
N
turn it clockwise until it engages in
position.
The marks on the filler cap and oil tank
are then in alignment.
Fold the grip down.
N
Filler cap is locked.
If the filler cap cannot be locked in the oil
tank opening
Bottom of cap is twisted in relation to
top.
Remove the cap from the oil tank
N
and check it from above.
1
Left: Bottom of cap is twisted –
inner mark (1) in line with
outer mark.
Right: Bottom of cap in correct posi-
tion – inner mark is under the
grip. It is not in line with the
outer mark.
HTA 65, HTA 85