B. Removing the Maxi-Cosi CabrioFix/Pebble
14
• Unlock the Maxi-Cosi CabrioFix/Pebble by pulling the release lever upwards and at the same time forwards
(14). This releases the spindles from the anchor points.
15
• Take the Maxi-Cosi CabrioFix/Pebble out of the Maxi-Cosi EasyBase 2 (15).
5. MAINTENANCE
• IMPORTANT! Always remove the Maxi-Cosi EasyBase 2 from the car before carrying out any of the
following.
• Use lukewarm water, soap and a rag to clean the plastic parts of the Maxi-Cosi EasyBase 2. Do not use
abrasive cleaners.
• IMPORTANT! Never use lubricants, not even for the moving parts on the Maxi-Cosi EasyBase 2.
• If the indicators no longer work, please contact your supplier or dealer.
6. GENERAL INSTRUCTIONS
Always pay close attention to the following...
• Prior to purchase check that the seat fits in your car properly (see section 9: Car fitting list).
• Always use the seat, even on short trips, as this is when most accidents occur.
• Never use the Maxi-Cosi EasyBase 2 on seats equipped with frontal airbags, as this can be extremely
dangerous. This does not apply to the so-called side airbags.
• The Maxi-Cosi EasyBase 2 must always be secured with the seat belt and support leg, even when not in
use. A loose Maxi-Cosi EasyBase 2 could injure other passengers in a sudden stop or crash.
• Make sure the Maxi-Cosi EasyBase 2 does not become wedged by adjustable seats or slamming the car
door or overloaded with heavy luggage.
• Always cover up the Maxi-Cosi EasyBase 2 when the car is parked in the sun, as plastic and metal parts
may become extremely hot.
• Make sure that all luggage and objects likely to cause injury in the event of an accident (on the rear
window shelf for instance) are properly secured.
• Take short breaks on longer trips to give your child some freedom of movement.
• Never leave your child unattended in the car.
• Save the instruction manual for future reference in the space provided on the back of the Maxi-Cosi
EasyBase 2.
Instructions for use
GB
11