Using Your Carpet Glider - shark S2901EU Notice D'utilisation

fig. 7

Using Your Carpet Glider

THE CARPET GLIDER
1
The Carpet Glider can be used with the Rectangular
Head to lightly steam your carpet and area rugs.
Just place the mop head with cleaning pocket
attached into the glider. (fig. 8)
6
7
8
fig. 8
2
Use the shaggy side of the cleaning pockets to lift
up and lock away all the dirt and debris and the
scrubbing side to break up the tough stains. (fig. 7)
When the water tank is empty, the Steam Mop will
stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from
the outlet. Follow the instructions from page 4. This
applies to switching the mop head or cleaning pocket
as well.
NOTE: Please wait 2-3 minutes for the Steam Mop
to cool off before switching the mop head or the
cleaning pocket. Never leave the Steam Mop with a
damp/wet cleaning pocket on any floor.
When you are done, press the power button to turn
the steam mop off.
The Steam Mop will not clean your
carpeting or area rugs. However, it is
great for grooming and freshening.
Move the Steam Mop back and forth across a
section of the carpet. (fig. 9)
www.sharkclean.eu
fig. 9
41