Programming The Temperature - illy Y3.3 IPERESPRESSO Manuel D'utilisation

PROGRAMMING THE TEMPERATURE

1-2 sec.
With the lever open, turn on the machine by
pressing one of the two coffee buttons for 1-2
sec.
Do not insert a capsule.
1
x 5
Press the button 5 times within 15 seconds
of turning on the machine. Both buttons will
flash. It is now possible to change the tempera-
ture as described in points 3 and 4.
2
Press the button to increase the tempera-
ture. The button flashes. Both buttons flash
after approx. 3 seconds.
The machine is now programmed� The next time the
pressed, the coffee is dispensed at the temperature that was just stored�
HOW TO COME RETURN THE MACHINE TO THE FACTORY SETTINGS:
With the lever open, turn on the machine by pressing one of the two coffee buttons for
1-2 sec.
Press the button 5 times within 15 seconds.
The and buttons will flash quickly for 2 seconds and will then turn on fixed.
Now the machine has returned to the factory settings for both preparations, both for the
quantity as well as the temperature.
3
Press the button to decrease the tempera-
ture. The button flashes. Both buttons flash
after approx. 3 seconds.
or button is
EN
4
31