Technische Daten - Jonsered HT2258 Li Manuel D'utilisation

Table des Matières

Les langues disponibles

LED screen

LED 4 is green

LED 1 is red and LED 2 is

green, battery pack does not

charge or operate correctly in

product

RED LED comes on, LED 2

is green and flashes during

charging or when the battery

pack is in the battery charger

RED LED flashes and LED 2

flashes green when the bat-

tery pack is installed.

Motorspezifikationen

Motortyp

Motorspannung

Motorleistung

Spezifikationen für Akku und Ladegerät

Standard-Akkutyp

Standard-Ladegerättyp

Lärm- und Vibrationsdaten

Äquivalenter Vibrationspegel (ahv, eq) Handgriff

vorn. Siehe Anmerkung 1.

Äquivalenter Vibrationspegel (ahv, eq) Handgriff

rechts. Siehe Anmerkung 1.

Schallleistungspegel, garantiert (LWA). Siehe An-

merkung 2.

Gemessener Schallleistungspegel. Siehe Anmer-

kung 2.

Schalldruckpegel am Ohr des Bedieners. Siehe

Anmerkung 3.

Possible faults

Possible steps

Battery pack is

Remove the battery pack from the battery charger and install in

overcharged

the product. Operate the product. Battery charger may be de-

fective. Speak to an approved service center.

Battery pack failure Remove battery pack from the product. Do not charge. Battery

pack is damaged and must be replaced. Speak to an approved

service center.

Internal battery

Move the battery charger and battery pack to a location where

tempature is too

the internal temperature of the battery pack can be between

low or too high for

5°C (41°F) and 45°C (113°F).

charging

Internal battery

The internal temperature in the battery must be between -15°C

temperature is too

(5°F) and 70°C (158°F). The environment temperature in the

low or too high

battery pack is too low or too high.

•