Fm Radio Mode - Renkforce RF-DAB-IR-1700 Notice D'emploi

• After the station scan has been performed, a list of the receivable stations is displayed.
• Select the desired station with the rotary knob TUNE/SELECT (9) or the arrow buttons (20).
• Press the rotary knob TUNE/SELECT (9) or the OK button (30) to confirm the selection and receive the station.
• To return to the station list and select another station, press the BACK
button (20).
• To start a new station search, activate the DAB Preset Scan in the settings menu (see the "Configuration" section)
Calling station information
While a station is playing, you can view more information about that station, the track you are currently playing, or
the time and date.
The information available depends in part on the content broadcast by the station. It may take some time
before all content is available.
• Press the FORWARD
information. Each time the button is pressed, one display is shown.
Manage channel list
• Select the station to be edited in the station list.
• Press the FORWARD
• Further options appear in the menu with which the station can be moved or deleted.
g) FM radio mode
For this mode of operation, the enclosed wire antenna must be connected to the ANTENNA DAB/FM
connector (14). A network connection is not required for this mode. If few or no stations are received, adjust
the orientation of the wire antenna or the location of the device. Placing the device near a window will
improve the reception quality.
60
(8) button or the corresponding arrow button (20) on the remote control to display more
(8) button or the corresponding arrow button (20) on the remote control.
(7) button or the corresponding arrow