Renkforce RF-DAB-IR-1700 Notice D'emploi page 71

" Playback Setup"
The following settings for the media center playback are possible here:
• Setting up the repeat function when playing music files (all tracks or one track is repeated)
• Random playback order when playing music files
"Resume when Power On"
Here you can specify whether the device is switched on in the last operating state before switching off or starts with
the display of the main menu.
"Power-on Options"
Here the following settings are possible for the reaction of the device after a voltage reset or power failure:
• Device goes into standby mode
• Device displays the main menu (home screen)
"Dimmer"
The behaviour of the display and the display brightness can be set here.
This menu item can also be selected directly using the DIMMER button (34).
• The mode determines whether the display is dimmed after some time of non-use or not.
• The brightness setting (level) determines the display brightness for dimmed and non-dimmed status.
The display brightness in standby mode can be adjusted manually by turning the rotary knob
TUNE/SELECT (9). If you increase the brightness in standby mode using the rotary knob, for example to
be able to read the clock, the original brightness as set in the configuration will be restored after approx.
20 seconds.
"EQ"
• Here you can set sound presets for different types of music.
• With the superior setting, personal settings of the equalizer can be made. Here you can also set the output level
and a 3D effect.
"Buffer Time"
Buffer time setting for internet radio playback.
When playing back internet radio stations, the data is cached in order to avoid interruptions in the data
connection in the event of a poor data connection or short interruptions. If your Internet reception is poor,
increasing the buffer time can contribute to uninterrupted playback.
71