How To Set The Automatic Humidity Control; Cleaning - Kroll TE80 Notice D'instruction

TE80, TE100
Connect mains plug to a socket with
16/Amp. fuse and earthing contact. Adjust
appliance to desired room humidity level.
Turn main switch to ON. The appliance works
permanently.
2.7.2 How to set the automatic humidity
control
1. Your dehumidifier can be equipped with an
adjustable humidistat (hygrostat) (in option).
When the hygrostat is not connected, the
appliance works also, but without automatic
control.
2. The humidistat knob turns clockwise.The
size of the room, the relative humidity and
the temperature will influence your setting.
Start it first by selecting the midway
position.
fig. 2:
Hygrostat
3. Once set into operation,the device works
until the set humidity is reached. Then the
unit will stop and start by itself. It is maintai-
ning the humidity you have selected.
4. If you want to remove more moisture, rotate
knob clockwise.
5. In extreme conditions, rotate the knob
clockwise to final position. At this setting,
your dehumidifier will operate continuously
regardless of the amount of moisture in the
air.
14
Attention

2.8 Cleaning

Always unplug power supply plug before wor-
king on the electrical system.
All work on the electrical installation must be
carried out by a qualified electrician.
For cleaning, please use brush or compressed-
air, don´t use water or dissolvent.
The dirty air-filter can be washed out in water
with detergent. Let it dry completely and then
mount it again into the device.
All work on the refrigeration system is to be
done by specialised persons only.
h
English
Attention
Attention
Attention