Mig/Mag Welding. Installation And Start-Up - gala gar AutoMIG 3 Manuel Technique D'instructions

3.2 MIG/MAG WELDING. INSTALLATION AND START-UP

3.2.1 INSTALLATION OF STANDARD MIG/MAG SYSTEM WITH GAS. TORCH TO POSITIVE POLE.
MARK REF.
1 54312029
2 12140301210 Wheel "V" 0,6-0,8 mm
3 12140301211 Wheel "V" 0,8-1,0 mm
4 12140301231 Wheel AL "U" 1,0 -1,2 mm
5 49216018
6 37600000
7.1 M15 4000
7.2 M25 4000
8 5722
9 53112219
12 54312560
3.2.2 INSTALLATION OF (FCAW) MIG/MAG SYSTEM WITHOUT GAS. TORCH TO NEGATIVE POLE.
MARK REF.
1 54312029
7.1 M15 4000
7.2 M25 4000
9 53112219
12 54312560
13 12140301221
DESCRIPTION
Input cable
Machine-gas connection (2 m)
Argon pressure regulator – Mod. EN 2
Antorcha MIG EDR 15 4mts
Antorcha MIG EDR 25 4mts
Graphite wire conduit 4 m
Earth clamp cable
Change of polarity cable
DESCRIPTION
Input cable
Antorcha MIG EDR 15 4mts
Antorcha MIG EDR 25 4mts
Earth clamp cable
Change of polarity cable
Wire reel 0,8-1,0
Gala AutoMIG 3
OBSERVATIONS
INCLUDED
INCLUDED
For aluminium welding
INCLUDED
For aluminium welding
CONNECTED TO NEGATIVE
CONNECTED TO POSITIVE
OBSERVATIONS
INCLUDED
CONNECTED TO POSITIVE
CONNECTED TO NEGATIVE
For tubular wire
21