Fault/Remedy - ADE WS 1822 Mode D'emploi

Fault/Remedy

Fault
The DCF77 signal for the
time cannot be received.
The temperature
information of the
sensor seems too high.
Instead of showing
the measured values
for temperature or
humidity, the display
shows H.HH or LL.L.
The temperature
indicator is blinking on
the display.
The indicator is illegible,
the function is unclear,
or the values are
obviously false.
Weather Station with Wireless Outdoor Sensor WS 1822
Possible cause
‚ Check the chosen
location.
‚ Start the signal reception
manually, if necessary.
‚ Adjust the time manually.
‚ Check whether the sensor
has been exposed to
direct sunlight.
‚ The values lie above or
below the measurement
range.
‚ The temperature alarm
has tripped; see chapter
"Temperature alarm".
‚ Remove the batteries for a
few moments.
65