Troubleshooting - Rotel U451CH1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• TROUBLESHOOTING

Stop using the appliance immediately and unplug the power cord if an abnormal
o
noise, peculiar smell and smoke occur.
If the appliance stops running unexpectedly, make sure the power plug is plugged in
o
properly, check if there is no power outage and if the jug is properly installed.
Please contact your local service centre if this product still fails to work after above
o
check.
Problem
The power indicator light
does not go on
The indicator light goes on
but this appliance does
not work
A programme button does
not react
The ingredients are not
processed properly
E1, E2, E3, E4
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Possible cause
The appliance is not (properly)
plugged in
The "Start" button has not been
pushed again after the pro-
gramme setting
The jug and the cover are not
positioned or locked correctly
The appliance could not auto-
matically reset after a power
shortage
The amount of liquid is not suffi-
cient
The volume of ingredients is too
high
The pieces of food are too big or
too hard
The volume of ingredients is too
high
Machine failure
The coupler surface is wet
63
Solution
Plug the appliance into the
mains power supply
Press the "Start/Stop" button
after selecting a programme
Reinstall the jug properly onto
the motor unit and lock the
cover in position
Turn off the appliance and re-
start after 3 minutes
Pour liquid to the correct level
Adjust recipe or proceed smaller
batches
Disconnect from the mains,
pour out the food and then cut
it into smaller pieces / Reduce
the quantity of ingredients
processed
Please contact your local service
centre
Dry the coupler surface

Publicité

Table des Matières
loading

Table des Matières