Correct Posture - Beurer Life BM 66/U Mode D'emploi

The cuff should be placed on
the upper arm so that the low-
er edge is 2 to 3 cm (0.8" to
1.2") above the bend of the
elbow and above the artery.
The tube should be in line with
the centre of the palm.
Now place the free end of the
cuff snugly, but not too tightly,
around the arm, and fix it with
the Velcro fastener.
Insert the cuff tubing into the
socket for the cuff attach-
ment on the left side of the
unit. Make sure it is inserted
securely in the main unit and
that there are no kinks in the
cuff tubing.
Important: This device should only be operated with the
original cuff. The cuff included with the device is suitable
for an upper arm circumference of 22 – 42 cm (8.7" to
16.5"). Replacement cuffs from other models cannot be
used with this model. Doing so, will result in inaccurate
readings or error messages.

6.2 Correct posture

• Rest at least for 5 minutes before each measurement.
Otherwise there may be erroneous results.
• You can perform the measurement either sitting or lying
down. Always make sure that the cuff is on a level with
your heart.
• In order not to distort the result, it is important to keep
still during the measurement and not talk. The most pre-
cise measurement results are obtained when taken in
a relaxed state. You may close your eyes and breathe
calmly during the measurement.
• Please note that any muscle movement during inflation
or deflation can cause measurement error.
13