Evaluating Results - Beurer Life BM 66/U Mode D'emploi

• Using the Start/stop button
pressure monitor. The measurement is then stored
in the selected user memory.
If you forget to turn off the device, it will switch off
automatically after approx. 1 minute. In this case too,
the value is stored in the selected or most recently
used user memory.
• Wait at least 5 minutes before taking an-
other measurement!
NOTE:
This monitor will re-inflate automatically if the system de-
tects that your body requires more pressure for measure-
ment. As soon as a heart rate is detected, the heart rate
symbol is displayed.
• When the measurement is completed the cuff will deflate
entirely. Heart rate, systolic and diastolic blood pressure
are displayed.
• You can interrupt measurement at any time by pressing
the start/stop button
• _ appears if it has not been possible to perform the
measurement properly. Observe the section on error mes-
sages/troubleshooting and repeat the measurement.
• The test result is saved automatically.
, switch off the blood
.
• To switch off and release the pressure, press the start/
stop button again. If you forget to switch off the de-
vice, it switches off automatically after approx. 1 minute.
Wait at least 5 minutes before taking another measurement.

7. Evaluating results

WARNING:
• This product does not and is not intended to provide a
medical diagnosis. Measurements results are for refer-
ence only. Self-diagnosis and treatment, e.g. regarding
medication, using measured results represent a risk for
your health. Always consult with a licensed physician
for determination of appropriate medication and dos-
age thereof. Follow the instructions of your physician
or licensed healthcare provider. If you have or suspect
that you have a medical problem, promptly consult your
physician. If you have an emergency please call 911
immediately.
• Only a physician or a trained health care professional
who is familiar with your medical history is able to ac-
curately interpret your blood pressure measurements.
Consult your physician before starting blood pressure
monitoring.
• Please note that technically related measuring toler-
ances are possible. Please see section "11. Technical
Specifications" for details.
16