Correct Posture - Beurer BC 19 Mode D'emploi

desired memory space by pressing the + or - volume
button.
Two memories with 60 memory spaces each are availa-
ble to save the measurement results of two different
people separately or to save morning and evening mea-
surement values separately.
5. Measuring blood pressure
Positioning cuff
• Bare your left wrist, making sure that the circulation in
the arm is not restricted by any clothes etc. that are
too tight. Position the cuff on the inside of your wrist.
• Fasten the cuff with the Velcro fastening so that the
upper edge of the monitor is positioned approx. 1 cm
below the ball of your thumb.
• The cuff has to be fitted tightly around the wristbut
should not constrict it.
All manuals and user guides at all-guides.com
Important: The instrument should only be operated with
the original cuff.

correct posture

• Rest for approx. 5 minutes before each measurement.
• You can perform the measurement either sitting or
• In order not to distort the result, it is important to keep
Measuring blood pressure
• Put on the cuff as described previously and assume
• Start the measurement process by pressing START/
16
Otherwise there may be divergences.
lying down. It is essential to support your arm and
have it at an angle. Always make sure that the cuff is
level with your heart. Otherwise there may be serious
divergences. Relax your arm and the palms of your
hands.
still during the measurement and not talk.
the position in which you want to carry out the mea-
surement.
STOP button . After checking the display with all
digits lighting up, the monitor will automatically inflate.
Following the self-test, during which all display ele-
ments briefly appear, the measurement begins. During
inflation the device already determines measured
values used to estimate the required inflation pressure.