Inserting/Replacing Batteries; Cuff Information; Setting The Hour Format, Date And Time - Beurer Life BM 66/U Mode D'emploi

5.1 Inserting/Replacing
batteries
• Remove the battery cov-
er from the back of the
monitor.
• Clean the battery con-
tacts and those of the
device prior to installa-
tion with a soft dry cloth.
• Insert or replace with only four AAA 1.5 V alkaline bat-
teries. Make absolutely sure that you insert them with
the correct polarity (+/-) as indicated (see the diagram
inside the battery compartment). Do not use other
types of batteries.
• Replace the battery cover carefully.
If the battery change icon
ated, measurement is no longer possible and you must
replace all the batteries.
4 x 1,5 V AAA (LR03)
is continuously illumin-

5.2 Cuff information

WARNING:
• Proper cuff size is important for accurate measure-
ments. Only use the device on adults who have the
correct upper arm circumference for this instrument.
This unit includes 1 size of arm cuff:
• Standard size fits 22 – 42
cm / 8.7" to 16.5"
5.3 Setting the hour for-
mat, date and time
This menu allows you to set
the following functions, one after another.
Hour format
➔
It is essential to set the date and time. Otherwise, you will
not be able to save your measured values correctly with a
date and time and access them again later.
If you press and hold the M1 or M2 memory button,
you can set the values more quickly.
8
Date Time
➔