Electrical Requirements - 120 Volt Models - Kenmore 110.81422 Guide D'utilisation Et D'entretien

ELECTRICAL REQUIREMENTS – 120 VOLT MODELS
I
supply is required.
This Laundry Center is equipped with a power supply cord
I
having a 3 prong grounding plug.
Be sure that the electrical connection is adequate and in
I
conformance with the National Electrical Code, ANSI/NFPA
edition and all local codes and ordinances.
National Fire Protection Association, One Batterymarch
Park, Quincy, MA 02269 (U.S.A.), or Canadian Standards
Association, 178 Rexdale Blvd., Toronto, ON M9W 1R3
CANADA.
I
fuse or circuit breaker matches the rating of your line.
Use a separate circuit serving only your dryer.
I
To minimize possible shock hazard, the cord must be plugged
I
accordance with local codes and ordinances. If a mating outlet
is not available, it is the personal responsibility and obligation
of the customer to have the properly grounded outlet installed
If codes permit and a separate ground wire is used, it is
I
ground path is adequate.
Do not ground to a gas pipe.
I
Do not use an extension cord.
I
Do not have a fuse in the neutral or ground circuit.
I
I
Laundry Center is properly grounded.
For a grounded, cord-connected washer/dryer:
This washer/dryer must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. This washer/dryer uses a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative or
personnel if you are in doubt as to whether the washer/dryer
is properly grounded. Do not modify the plug on the power
cord: if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
9