Installation Instructions; Tools And Parts - Kenmore 110.81422 Guide D'utilisation Et D'entretien

TOOLS AND PARTS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed:
blade screwdriver
Tin snips (for new vent
installations)
Vent clamps
Parts supplied:
Remove parts package from the washer basket. Check that all parts were included.
Rear leveling legs (2)
Parts needed: (Not supplied)
Inlet hoses with flat washers

INSTALLATION INSTRUCTIONS

Adjustable wrench that
opens to 1" (25 mm) or
(for adjusting dryer feet)
Caulking gun and
compound (for installing
new exhaust vent)
Pliers
Front leveling legs (2)
Check local codes, electrical supply, and venting, and read "Electrical Requirements" and "Venting
Requirements" before purchasing parts.
Mobile home installations require metal exhaust system hardware available for purchase from your
local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME
(1-800-469-4663).
Wire stripper (direct wire
installations)
Level
Wood block
(for leveling)
Removable tie strap
1/4" (6 mm) nut
driver or socket wrench
(recommended)
Knife
Ruler or measuring tape
Drain hose
®
5