Kenmore 110.81422 Guide D'utilisation Et D'entretien page 8

If your outlet looks like this:
ring or spade terminals and UL listed strain
receptacle
If connecting by direct wire:
Flexible armored cable or nonmetallic sheathed copper cable
I
I
At least 5 ft (1.52 m) long.
I
For a grounded, cord-connected washer/dryer:
This washer/dryer must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. This washer/dryer uses a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
For a permanently connected washer/dryer:
This washer/dryer must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the washer/dryer.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative or
personnel if you are in doubt as to whether the washer/dryer
is properly grounded. Do not modify the plug on the power
supply cord: if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
8
ELECTRICAL REQUIREMENTS – 240 VOLT MODELS
(CANADA)
It is your responsibility
I
To be sure that the electrical connection is adequate and in
I
conformance with the Canadian Electrical Code, C22.1 – latest
edition and all local codes A copy of above codes standard
Rexdale Blvd., Toronto, ON M9W 1R3 CANADA.
I
recommended. Connect to an individual branch circuit.
This dryer is equipped with a CSA
I
intended to be plugged into a
The cord is 5 ft. (1.52 m) long.
Be sure wall receptacle is within
reach of laundry center's location.
If using a replacement power supply cord, it is recommended
I
that you use Power Supply Cord Replacement Part Number
9831317.
For further information, please reference service numbers
I
located on the back cover.