Functional Description - IMG STAGELINE LE-500DMX Mode D'emploi

Binary adjustment of the DIP switches is made, i. e.
the address is assigned according to the power of
two:
Switch 1 corresponds to 2
1
sponds to 2 (= 2), switch 3 corresponds to 2
(= 4), etc. The addresses are adjusted by "addition"
of the switches, e. g. 4 + 16 + 32 = address 52. For
this purpose, set the switches 3, 5, and 6 to ON
2 4 5
(2 + 2 + 2 ). The highest value to be adjusted for
this unit is address 508.
Adjusting examples:
If channels 1 to 4 of the controller are provided for
control, address 1 must be adjusted on the light
effect unit.
256 128 64 32 16 8
Address 1 on the scanner
If channels 5 to 8 of the controller are provided for
control, address 5 must be adjusted on the light
effect unit.
256 128 64 32 16 8
Address 5 on the scanner
3) DIP switch 10 inverts the horizontal control of the
scanner. If this switch is set to ON, the mirror turns
to the left instead of turning to the right, and vice
versa. Thus, it is possible to realize synchronous
movements of the connected scanners in opposite
directions.
DIP switch 10 set to ON:
reversing of the sense of rotation
Note: Restart the scanner after each modification of
the DIP switch adjustments, i. e. switch the
scanner off, then switch it on again.

6.2.1 Functional description

Channel 1
0 – 8: lamp off after 20 seconds
9 – 31: lamp on, shutter closed
32 – 64: shutter open
65 – 240: closing and opening of shutter to a
0.5 Hz to 4 Hz rhythm
241– 254: shutter closed
255: reset of the scanner
Channel 2
0 – 16: no gobo
17 – 33: gobo round, white
34 – 50: gobo round, red
0
(= 1), switch 2 corre-
4 2 1
4 2 1
51 – 67: gobo round, blue
68 – 84: gobo round, yellow
85 – 101: white tunnel
102 – 118: seven arcs, orange
2
119 – 135: blossom, magenta
136 – 152: seven-leaf clover, green
153 – 169: light beams, red and blue
170 – 186: pentagonal star, turquoise
187 – 203: flower, yellow
204 – 220: four-colour tunnel
221 – 237: eight stars, blue
238 – 255: rapid alternation of gobos
Channel 3
0 – 255: horizontal control of the mirror
Channel 4
LE-500DMX:
0 – 255: vertical control of the mirror
LE-510DMX:
0 – 105: clockwise movement of gobos
(0 = max. speed/105 = min. speed)
106 – 142: gobos do not move
143 – 255: counterclockwise movement of gobos
(143 = min. speed/255 = max. speed)
7 Specifications
Power supply: . . . . . . 230 V~/50 Hz
Power consumption: . 200 VA
Lamp: . . . . . . . . . . . . 1 halogen lamp (15 V/150 W),
Dimensions: . . . . . . . 384 x 145 x 184 mm
Weight: . . . . . . . . . . . 6.5 kg
According to the manufacturer.
Subject to technical change.
lamp base GZ 6.35
(without mounting bracket)
GB
9