Troubleshooting - Belkin F1DL102Utt Guide D'utilisation

FAQs
Q: What are the benefits of the Belkin 2-Port KVM Switch with Audio Support and
Built-In Cabling over a similar competitor product?
A: The Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling is an
affordable solution, packed with features usually found in higher-priced units.
The Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling offers
software switching, resolution support of up to 2048x1536, and a Belkin
Three-Year Limited Warranty—all at a very affordable price.
Q: Do I have to install any software to use the Switch?
A: No, the included Windows-only software is optional. The Switch has manual
port selectors to change ports.
Q: Does the Switch require an AC adapter?
A: No, the USB ports of your computer power the Switch.
Q: Can I use the Switch to switch video signals only?
A: No, you cannot use the Switch to switch between video signals only. The
Switch requires power from the USB ports in order to operate.
Q: What type of USB devices can I connect to the Switch?
A: The Switch will work only with USB mice and keyboards. No other devices
are supported.
Q: How long is the warranty for the Switch?
A: The Switch comes with a Three-Year Limited Warranty.
10

TROUBLESHOOTING

Video
I am getting ghosting, shadowing, or fuzzy images on my monitor.
• Check that all video cables are inserted properly.
• Check that the monitor you are using supports the resolution and refresh-rate
setting on your computer.
• Check that the graphics card you are using supports the resolution and
refresh-rate setting on your computer.
• Connect the monitor directly into the computer you are having trouble with to
see if the problem still appears.
I am getting a black screen on my monitor.
• Check that all video cables are inserted properly.
• Connect your monitor directly to the computer to verify that your monitor is
functioning properly.
• Take your computer off standby mode.
Keyboard
Computer does not detect your keyboard and you get a keyboard error reported
at boot up.
• Check that the keyboard cable between the Switch and the computer is
connected properly. Tighten any loose connections.
• Try swapping your keyboard with a different one.
• Enable USB support on your BIOS.
11