Connecting To A Computer - Sony CMA-D3 Mode D'emploi

Connections

Connecting to a Computer

The following is a connection for controlling the camera with a computer using an RS-232C command.
For details on RS-232C protocols and cables for connection to a computer, contact your authorized Sony dealer.
DXC-390/390P
VIDEO OUT
DC IN/VBS
TRIG IN
LENS
MENU LOCK
OFF ON
RGB/SYNC
REMOTE
1) Use the shielded connecting cable for connecting to a computer.
2) To extend the cable, connect the CCMC-3MZ camera cable to the CCZ-A camera cable using the cable adaptor supplied with the CCMC-3MZ.
12
(GB)
Computer
Serial interface connector
DC IN/VBS
Connecting cable
TRIG IN
REMOTE
CCMC-3MZ camera cable
RGB/SYNC
26-pin
CCZZ-1E cable adaptor
(supplied with the CCMC-3MZ)
75-ohm coaxial
cable
R/VBS
OUT
1)
REMOTE (front)
W.E OUT G/Y OUT B/C OUT
TRIG IN HD VD/SYNC
CAMERA
(26-pin)
26-pin
CCZ-A camera cable
2)
(max. 100 m)
Video input
connector
Video monitor,
VCR, etc.
CMA-D3/D3CE camera adaptor
~
R/VBS OUT DC/AC
CAMERA
AC IN
RGB SELECT
VBS/Y/C
IN
DC15V
IN
OUT
Power
cord
2)