Sony CMA-D3 Mode D'emploi page 24

Location and Functions of Parts
3 W.E OUT (Write Enable pulse output) connector
(BNC type)
Outputs the WE pulse to communicate the timing to store
the image on an external frame memory, etc.
For detailed information, read the instruction manual of the
DXC-390/390P.
4 TRIG IN (trigger input) connector (BNC type)
Connects to a commercially available slave unit in strobe
mode by converting the connector of the slave unit into
BNC type.
For detailed information, read the instruction manual of the
DXC-390/390P.
5 HD (horizontal deflection) input/output connector
(BNC type)
Inputs or outputs the HD signal. Input or output can be
selected by setting the IN/OUT selector 7.
6 VD/SYNC (vertical deflection/sync) input/output
connector (BNC type)
Inputs or outputs the vertical deflection signal or sync
signal. Input or output can be selected by setting the IN/
OUT selector 7.
The type of sync signal is set on the SYSTEM menu of the
video camera.
7 IN/OUT (sync input/output) selector
Set to IN to use the HD connector 5 and VD/SYNC
connector 6 as inputs, and to OUT to use them as outputs.
Set to OUT when external sync is not used.
8
(GB)
Using the HD and VD/SYNC connectors
The following shows how to use the HD and VD/SYNC
connectors combined with the menu setting on the video
camera and the IN/OUT selector on this unit.
Menu
setting on
Purpose
camera
Any
To use HD and
VD signals for
external sync
Any
To use VBS
signal for
external sync
Set SIGNAL
To use HD and
to HD/VD.
VD signals
output from the
camera
Set SIGNAL
To use SYNC
to C. SYNC.
signal output
from the
camera
IN/OUT
Function of connector
selector
setting HD
VD/SYNC
HD signal
IN VD signal
input
input
No signal
IN VBS signal
input
input
HD signal
OUT VD signal
output
output
No signal
OUT SYNC
output
signal
output