Rear Panel - Sony CMA-D3 Mode D'emploi

Rear Panel

1 RGB, VBS/Y/C switch
2 G/Y OUT, B/C OUT and R/VBS OUT connectors
3 W.E OUT connector
W.E OUT
TRIG IN
4 TRIG IN connector
5 HD connector
6 VD/SYNC connector
7 IN/OUT selector
1 RGB, VBS/Y/C switch
Set the switch to RGB to output the sync signal from the G/
Y OUT, B/C OUT and R/VBS OUT connectors 2.
Set the switch to VBS/Y/C to output the VBS or Y/C signal
from these connectors.
G/Y OUT B/C OUT R/VBS OUT
RGB
VBS/Y/C
HD VD/SYNC
IN
OUT
~
DC/AC
CAMERA
AC IN
SELECT
DC15V
IN
2 G/Y OUT, B/C OUT and R/VBS OUT (video signal
output) connectors (BNC type)
Output the video signal (RGB or Y/C/VBS) supplied from
the video camera.
8 CAMERA connector
9 DC/AC SELECT switch
q; AC IN connector
qa DC 15 V IN connector
7
(GB)