Removing The Appliance - Gaggenau AF2 Serie Notice D'utilisation Et De Montage

Appliance width 90 cm:
You must also screw the appliance to the wall-hanging
cupboards either side of it.
Connecting the pipes
Note: If an aluminium pipe is used, smooth the area
where it is to be connected before you connect it.
Exhaust air pipe, dia. 150 mm (recommended size)
Fit the exhaust air pipe directly to the air-pipe connector
and seal the joint.
Exhaust air pipe, dia. 120 mm
1 Fit the reducing connector directly to the air-pipe
connector.
2 Attach the exhaust air pipe to the reducing
connector.
3 Seal both joints appropriately.

Removing the appliance

1 Disconnect the electrical connection.
2 Disconnect the pipes.
3 Remove the metal grease filter.
4 Remove the protective caps from the fastening
elements.
5 Remove the appliance; see section entitled
"Removing the appliance".
33