Gaggenau AF2 Serie Notice D'utilisation Et De Montage page 25

By hand:
Note: You can use a special grease solvent for stubborn
dirt. It can be ordered via the Online Shop.
▯
Soak the metal mesh grease filters in a hot soapy
solution.
▯
Clean the filters with a brush and then rinse them
thoroughly.
▯
Leave the metal mesh grease filters to drain.
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has no
effect on the function of the metal mesh grease filters.
▯
Do not clean heavily soiled metal mesh grease
filters together with utensils.
▯
Place the metal mesh grease filters loosely in the
dishwasher. The metal mesh grease filters must not
be wedged in.
Removing metal grease filter
1 Pull out the filter pull-out and push in the push-to-
open mechanism.
2 Open the lock on the metal grease filter and pull
the metal grease filter out of the retainer at an
angle.When you do this, take hold of the metal
grease filter from underneath with your other hand.
Notes
‒ Fat may accumulate in the bottom of the metal
grease filter.
‒ Hold the metal grease filter level to prevent fat
from dripping out.
3 Clean the metal grease filter.
For appliances with a glass plate in the filter pull-out:
▯
The glass plate can be removed easily and can be
cleaned in the dishwasher.
▯
To remove the glass plate, carefully lift it out.
Installing the metal mesh grease filter
1 Insert the metal grease filter diagonally.
When you do this, take hold of the metal grease
filters from underneath with your other hand.
2 Swing the metal grease filter up and click it into
place.
3 Push and open the push-to-open mechanism.
Note: The push-to-open mechanism must be
pressed in order to guarantee that the drawer works
correctly.
25