Disposal; Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti SCW 70 Mode D'emploi

Fault
The power tool doesn't start.
No / reduced suction power.

9 Disposal

Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or
Hilti representative for further information.
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.

10 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

11 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2004/108/EC, 2006/42/EC, 2011/65/EU, EN 60745‑1,
EN 60745‑2‑5, EN ISO 12100.
Possible cause
The carbon brushes are worn.
Chip ejector channel blocked.
Circular saw
SCW 70/ WSC 7.25‑S
01/02
2011
Remedy
Have it checked by a trained electrical
specialist and replaced if necessary.
Clean out the chip ejector channel.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
01/2012
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
en
Jan Doongaji
Executive Vice President
Business Unit Power
Tools & Accessories
01/2012
25