Dantherm CDF 10 Manuel D'entretien page 18

Mounting and installation,
Note
Condensate outlet The condensate outlet is located at the bottom of the dehumidifier. The unit has a drain
Placing of the con-
densate outlet
Connection of
power supply
18
On the rear of the unit a cable binder protects the compressor during transport. This
cable binder must be removed before suspension and power connection
spigot intended for connection of a ½'' flexible or fixed water connection. If water drain
through the wall is chosen, a suitable hole is made in the wall and the condensate hose
is led out through this hole, before suspending the dehumidifier on the wall suspension
bar.
As an alternative a condensate pump can be fitted at the water outlet to pump the wa-
ter to a drain.
The placing of the condensate out-
let is shown on the drawing:
The unit is delivered complete with cable and plug for connection to 230V/50Hz.
Power is connected to the unit in accordance with the nameplate. Please refer to the
wiring diagram on page 67.
Note: All electrical connections must be made in accordance with local power supply.
continued