Technical Data; Symbols And Their Meaning; Assembly Tools - Wolfcraft MASTER cut 2500 Traduction De La Notice D'utilisation Originale

INTRODUCTION
• PLEASE NOTE: Do read all safety & other instructions that have come with the Master cut 2500 and with the power tools you use
for work. Failing to observe the safety & other instructions may cause electric shocks, fire and/or severe injuries.
• Do keep the operating instructions for future reference in a safe place.

TECHNICAL DATA

dimensions (put up for use):
dimensions (folded up):
worktop:
maximum height of work piece:
maximum cutting width with parallel guide:
maximum cutting length:
maximum dimension of work piece:
diameter of the clamping holes:
pattern of the clamping holes:
load-bearing capacity:
weight:

SYMBOLS AND THEIR MEANING

Warning against a general danger
Read the instructions!
Goggles must be worn.
Hearing protection must be worn.
Dust mask must be worn.
Pull the plug.
General information

ASSEMBLY TOOLS

1 allen wrench: A/F 5
(included in scope of delivery)
1 hexagon wrench: SW 10
(not included in scope of delivery)
1 screwdriver: PH 1
(not included in scope of delivery)
t
1185 x 757 x 863 mm (width x depth x height)
1085 x 757 x 213 mm
1035 x 695 mm
circular saw bench 60 mm (guide bar 60 mm)
circular saw bench 570 mm
guide bar 740 mm
600 x 400 x 65 mm (milling table)
20 mm
135 / 135 mm (horizontal / vertical)
120 kg
24 kg
Do not use the machine for cutting firewood.
Use only hand circular saws with a maximum cutting depth of 70 mm.
Use only saw blades with a maximum diameter of 200 mm
for your hand circular saw.
Set the cutting depth of your hand circular saw before every cut in such
a way that the saw blade does not protrude more than 4 mm from
the work piece.
Use only hand circular saws with a riving knife.
Use as a milling table only in conjunction with the parallel
milling guide (art. no. 6901000).
Use only machines with a maximum output of 2760 W.
42