Maintenance And Service; Environment Protection - Bosch GRL 240 HV Consignes De Fonctionnement/Sécurité

Working with the Measuring Rod
(Accessory) (see figure F)
Do not operate during
!
DANGER
storms or near high
voltage. Risk of being struct by lightning or
electrocution.
Keep at a safe distance from electrical
installations. When it is essential to work
in this environment, first contact the safety
authorities responsible for the electrical
installations and follow their instructions.
For checking irregularities or projecting
gradients, it is recommended to use the
measuring rod together with the
22
laser receiver.
Store and transport the
!
WARNING
tool only in the supplied
protective case.
Check the tool each time before using.
Keep the tool clean and dry at all times to
ensure proper and safe operation.
Do not immerse the tool into water or other
fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit
opening of the laser.
In case of visible damage or loose
components in the interior of the tool, the
safe function is no longer ensured.
If the tool should fail despite the care taken
in manufacturing and testing procedures,
repair should be carried out by an
authorized after-sales service center for
Bosch power tools.
A relative millimeter scale (±50 cm) is marked
on the top of the measuring rod
height can be preset at the bottom of the
elevator column. This allows for direct reading
of deviations from the specified height.

Maintenance and Service

In all correspondence and spare parts
orders, please always include the 10-digit
article number given on the type plate of the
tool.
In case of repairs, send in the tool packed in its
protective case 30.

ENVIRONMENT PROTECTION

Recycle raw materials & batteries
instead of disposing of waste. The
unit, accessories, packaging & used batteries
should be sorted for environmentally friendly
recycling in accordance with the latest
regulations.
-18-
. Its zero
22