Kenwood CMOS-320 Mode D'emploi page 12

Camera Setting (CMOS-320 only)
For Guideline Adjustment
• The subsequent adjustments adjust the sizes, lengths and positions
of the guidelines displayed in the wide view and overhead view.
By default, guidelines shown below are displayed assuming that
the camera installation height is 80 cm (2.62 feet) and that the
distance between the left and right lines of the parking space is 2.2
meters (7.22 feet).
• The red line is used to indicate the parking position and can set it
independently from other guide lines.
2.2 m (7.22 feet)
Green
2.7 m
(8.86 feet)
Red
Wide View Guideline Adjustment (Size)
This item adjusts the overall size of guidelines displayed in
the wide view.
1
Select "GUIDELINE ADJUSTMENT (Size)".
2
Press the + or – button of the switch unit to
adjust the size.
12
|
CMOS-320/CMOS-220
3
After completing the adjustment, press the
view button.
Advances to "GUIDELINE ADJUSTMENT
(Horizontal direction)".
Wide View Guideline Adjustment
(Horizontal Direction)
This item adjusts the left-right positioning of the
guidelines displayed in the wide view.
1
Select "GUIDELINE ADJUSTMENT (Horizontal
direction)".
2
Press the + or – button of the switch unit to
adjust the left-right positioning.
3
After completing the adjustment, press the
view button.
Advances to "GUIDELINE ADJUSTMENT (Red Line
Position Setting)".