Product Variants And Designs; Risks And Safety Information; Warning - bredent BF 2 Manuel D'utilisation Et D'entretien

Speed
Voltage
Power
Range of frequencies
Fuse

1.5 Product variants and designs

Milling unit BF 2 230 Volt
Optional accessories
Milling base
Tap handwheel BF 1
Model support BF 2
ø
Chuck BF1
3 mm
Transfer device 56/8 3 mm
Brenometer surveying system 7 Parts

2. Risks and safety information

Signal word:
Described under Points 2.1 Warning and 2.2 Caution.
Important information is highlighted using the words „Warning" or „Caution".

Warning

Provides information concerning potential dangers, which could result in severe injuries or death if
ignored.
Caution
Provides information concerning potential dangers, which could result in injuries or damage to the
machine if ignored.
2.1 Warning
Damaged machine
Do not use a damaged machine if, for example, the housing components, cable, handpiece or the
mains plug are damaged.
Improper use
 Do not heat up inflammable, explosive substances using the device!
 Do not operate or heat up in areas containing inflammable or explosive substances!
 Do not operate in an environment subject to extreme humidity (e.g. steam jet, washbasin)
 Do not use on patients or animals (not a medical device!)
14
U~
P
f
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany · T: +49 7309 872-22 · F: +49 7309 872-24
www.bredent.com · @: info@bredent.com
[rpm]
[V]
[W]
[Hz]
[A]
REF 14000980
REF 14000893
REF 33001154
REF 73000170
REF 73000153
REF 36001163
REF 31000002
0 – 40,000
110-230 (Input)
80
50/60
2 x 2,0