HQ Power HQPL10001 Mode D'emploi page 4


Disconnect the device from the mains to clean it or when it is not in
use. Handle the power cord by the plug only.

Do not look directly at the light source as sensitive people may go into
epileptic seizure if they do.

Keep the device away from splashing and dripping liquids. Never put
objects filled with liquid on top of the device.

Note that damage caused by user modifications to the device is not
covered by the warranty.

Mechanical wear is not covered by warranty.

Keep the device away from children and unauthorised users.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.

Lighting effects are not designed for permanent operation: regular
operation breaks will prolong their lives.

Do not shake the device. Avoid brute force when installing or operating
the device.

Select a location where the device is protected against extreme heat
(see "Technical Specifications"), dust and moisture. Respect a
minimum distance of 0.5 m between the device's light output and any
illuminated surface.

Use an appropriate safety cable to fix the device (e.g. VDLSC7 or
VDLSC8).

Familiarise yourself with the functions of the device before actually
using it. Do not allow operation by unqualified people. Any damage that
may occur will most probably be due to unprofessional use of the
device.

Use the original packaging if the device is to be transported.

All modifications of the device are forbidden for safety reasons.

Only use the device for its intended purpose. All other uses may lead to
short circuits, burns, electroshocks, crash, etc. Using the device in an
unauthorised way will void the warranty.
4. Features

easy to use mini LED strobe

flash speed: via speed control knob
V. 01 – 02/12/2015
HQPL10001
4 ©Velleman nv