FMS Beaver V2 Manuel D'utilisation page 5

Model assembly
2.Install the 2 wing struts on the fuselage mount using 2 R-clips.
3. Secure the wing structure onto the fuselage using 4 screws
as shown. Ensure that these screws are securely tightened.
Horizontal stabilizer installation
1. Slide the horizontal stabilizer spar into the pass through at the
rear of the aircraft.
2. Install the 2 piece (left and right) horizontal stabilizer as shown.
Ensure the control horn faces down.
HKM3.0*26mm
5
E
N