Publicité
Direct drive cleaner head: Clearing obstructions.
Brosse à entraînement direct : Élimination des obstructions.
Elektrobürste mit Direktantrieb: Blockierungen beseitigen.
Cepillo Direct-drive: Eliminación de obstrucciones.
Testina di pulizia ad azionamento diretto: Rimozione delle ostruzioni.
1
2
Clearing mini motorised tool brush bar obstructions.
Élimination des obstructions de la mini-brosse motorisée.
Reinigung der Mini-Elektrobürste.
Eliminación de las obstrucciones del minicepillo motorizado.
Rimozione delle ostruzioni dalla spazzola motorizzata.
2
1
36
36
Direct aangedreven vloerzuigmond: Verstoppingen verwijderen.
Elektroszczotka Direct-drive: Usuwanie blokad.
Насадка с прямым приводом: устранение засорений.
Čistilna glava pogona: Odstranitev blokad.
3
Verstoppingen verwijderen uit de gemotoriseerde miniborstel.
Clearing mini motorised tool brush bar obstructions.
Устранение засорений в мини-электрощетке.
Čiščenje zagozdene mini motorne krtače.
3
EN
USING YOUR DYSON APPLIANCE
PLEASE READ THE 'IMPORTANT SAFETY INSTRUCTIONS' IN THIS DYSON
OPERATING MANUAL BEFORE PROCEEDING.
OPERATION
•
Do not use outdoors or on wet surfaces or to vacuum water or other liquids –
electric shock could occur.
•
Ensure the appliance remains upright in use and in storage. Dirt and debris may be
released if it is turned upside down.
•
Do not operate while checking for blockages.
•
For domestic indoor and car use only. Do not use it whilst the car is in motion or
while driving.
•
To operate the Max mode, locate the switch on the top of the appliance. Slide
the switch to the Max mode position.
•
To switch off Max mode, slide the switch back to the Powerful Suction mode position.
•
This product has carbon fibre brushes. Take care if coming into contact with them, as
they may cause minor skin irritation. Wash your hands after handling the brushes.
DIAGNOSTICS – LIGHTS DURING CHARGING
Charging, low charge.
Charging, medium charge.
Charging, nearly full.
Fully charged.
Battery fault – call the
Dyson Helpline.
Charger fault – call the
Dyson Helpline.
DIAGNOSTICS – DURING USE
High level of charge.
Medium level of charge.
Low level of charge.
Empty, needs recharging.
Battery fault – call the Dyson
Helpline.
Main body fault – call the Dyson
Helpine.
DOCKING STATION INSTALLATION
•
Use appropriate mounting hardware for your wall type and ensure that the docking
station is mounted securely. Ensure no pipe work (gas, water, air) or electrical cables,
wires or ductwork are located directly behind the mounting area. The docking station
must be mounted in accordance with regulations and applicable codes/standards
(state and local laws may apply). Dyson recommends the use of protective clothing,
eyeware and materials when installing the docking station.
CARPETS OR HARD FLOORS
•
Before vacuuming your flooring, rugs and carpets, check the manufacturer's
recommended cleaning instructions.
•
The brush bar on the appliance can damage certain carpet types and floors. Some
carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we
recommend vacuuming without the motorised floor tool and consulting with your
flooring manufacturer.
•
Before vacuuming highly polished floors, such as wood or lino, first check that the
underside of the floor tool and its brushes are free from foreign objects that could
cause marking.
LOOKING AFTER YOUR DYSON APPLIANCE
•
Do not carry out any maintenance or repair work other than that shown in this
Dyson Operating Manual, or advised by the Dyson Helpline.
•
Only use parts recommended by Dyson. If you do not, this could invalidate
your guarantee.
•
Store the appliance indoors. Do not use or store it below 3°C (37.4°F). Ensure the
appliance is at room temperature before operating.
•
Clean the appliance only with a dry cloth. Do not use any lubricants, cleaning agents,
polishes or air fresheners on any part of the appliance.
VACUUMING
•
Do not use without the clear bin and filters in place.
•
Fine dirt such as flour should only be vacuumed in very small amounts.
•
Do not use the appliance to pick up sharp hard objects, small toys, pins, paper clips,
etc. They may damage the appliance.
•
When vacuuming, certain carpets may generate small static charges in the clear bin
or wand. These are harmless and are not associated with the mains electricity supply.
To minimise any effect from this, do not put your hand or insert any object into the
clear bin unless you have first emptied it. Clean the clear bin with a damp cloth only.
(See 'Cleaning the clear bin'.)
•
Use extra care when cleaning on stairs.
•
Do not rest the appliance on chairs, tables, etc.
•
Do not press down on the nozzle with excessive force when using the appliance as
this may cause damage.
•
Do not leave the cleaner head in one place on delicate floors.
•
On waxed floors, the movement of the cleaner head may create an uneven lustre. If
this happens, wipe with a damp cloth, polish the area with wax, and wait for it to dry.
EMPTYING THE CLEAR BIN
•
Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
•
Ensure that the appliance is disconnected from the charger before emptying the clear
bin. Be careful not to pull the 'ON' trigger.
•
To make emptying the clear bin easier, it is advisable to remove the wand and
floor tool.
•
To minimise dust/allergen contact when emptying, encase the clear bin tightly in a
plastic bag and empty.
•
To release the dirt, hold the appliance by the handle, pull the red lever back and lift
upwards to release the cyclone. Continue until the bin base automatically opens and
releases the dirt.
•
Remove the clear bin carefully from the bag.
•
Seal the bag tightly, dispose as normal.
•
To close, push the cyclone downwards until it is in the normal position and manually
close the base of the bin – the base will click when it is securely in place.
CLEANING THE CLEAR BIN
•
Ensure the appliance is disconnected from the charger before removing the clear
bin. Be careful not to pull the 'ON' trigger.
•
Remove the wand and floor tool.
•
To remove the cyclone, hold the appliance by the handle, pull the red lever towards
you and lift upwards until the bin opens, then push in the red button located behind
the cyclone and lift the cyclone out.
•
To detach the clear bin from the appliance, pull back on the red catch located at the
base, slide the clear bin down and carefully remove forwards from the main body.
•
Clean the clear bin with a damp cloth only.
•
Do not use detergents, polishes or air fresheners to clean the clear bin.
•
Do not put the clear bin in a dishwasher.
•
Ensure the clear bin is completely dry before replacing.
•
To replace the clear bin, align the tabs on the clear bin with the grooves on the main
body and slide upwards into place until the catch clicks.
•
Slide the cyclone into the grooves of the main body and push downwards until it is in
its normal position and manually close the base of the bin – the base will click when it
is securely in place.
WASHING THE FILTERS
•
Your appliance has two washable filters; wash the filters at least once a month
according to the following instructions to maintain performance. More frequent
washing may be required where the user: vacuums fine dust, operates mainly in
'Powerful suction' mode, or uses the machine intensively.
WASHING FILTER A
•
Ensure the appliance is disconnected from the charger before removing the filter. Be
careful not to pull the 'ON' trigger.
•
Check and wash the filter regularly according to instructions to
maintain performance.
•
The filter may require more frequent washing if vacuuming fine dust or if used mainly
in 'Powerful suction' mode.
•
To remove the filter, lift it out of the top of the appliance.
•
Wash the filter with cold water only.
•
Run water over the outside of the filter until the water runs clear.
•
Squeeze and twist with both hands to make sure the excess water is removed.
•
Lay the filter on its side to dry. Leave to dry completely for a minimum of 24 hours.
•
Do not put the filter in a dishwasher, washing machine, tumble dryer, oven,
microwave or near a naked flame.
•
To refit, place the dry filter back into the top of the appliance. Make sure it is seated
properly.
WASHING FILTER B
•
To remove the filter, twist anti-clockwise to the open position and pull away from
the appliance.
•
Wash the inside of the filter under cold running water, rotating the filter to ensure all
pleats are covered.
•
Gently tap the filter against the side of the sink several times to remove any debris.
•
Repeat this process 4-5 times until the filter is clean.
37
Publicité
