Abus TVAC16000A/B Notice D'utilisation page 65

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 73
Input system information
Connection status
5. Under 'Camera name', give your system a name that will be
displayed on your mobile phone.
6. Now enter the 15-digit DID number.
This can be found in your monitor's network information, on
the product's product sticker or by clicking on the 'Search'
function where you will be shown all the devices in the
network.
7. After this, enter your password.
The password is the security code which can also be found
in your monitor's network information.
If you have not already changed the password on the
monitor, the standard password is: 123456.
8.
Finally, save these settings with 'Save' and 'Yes'.
As soon as you change the password on your monitor you must
also change it in the app, otherwise you will not be able to access
the cameras.
Once you have successfully added your system, the name of your
system and the current connection status will appear in the
overview.
Tap on the system to see the live view.
System name
E.g.: TVAC16000A/B
Connection status
Connected
= you are connected to your system
Disconnected
= there is no connection to the system
Add system
You can add further systems here
System configuration
You can go to the system configuration here.
Press
Connection update
The connection is being refreshed.
Firmware information / PIN code
Here you can see the system's current firmware
version and set a PIN code. You can find out
how to add a PIN code under .
65
to return to the live view.
English

Publicité

Table des Matières
loading

Table des Matières