Ibiza Light LAS60G Manuel D'utilisation page 2

Check for the contents in the package refer to the following list:
1. Laser lighting: 1
2. Power cable: 1
3. User's manual: 1
Technical parameters
1. Laser diode: DPSS, Green 532nm
2. Power supply: 220V-250Cac, 50-60Hz
3. Laser power: Green 60mW
4. Motor: N1.8 high precision step motor
5. Control mode: Sound control/AUTO/DMX
6. Dimensions: 158mm x 196mm x 63mm
8. Net weight: 1.5KG
9. Gross weight: 1.8KG
Function Setting
0=OFF 1=ON X=OFF or ON
DIPSWITCH CHART
#1 #2 #3 #4 #5 #6 #7 #8
0 X X X X X X X
1 X X X X X X X
SET DMX ADDRESS FOR DMX MODE
Installation
1. Firstly, be sure that the using voltage matches with the voltage marked
on the base of the laser lighting.
2. Installation should be made by professional technician. Fix the laser
lighting and adjust the angle of the laser lighting to you need; Install the
laser in such a height that the beam can't hit the eyes of the audience.
3. Please check whether the fan and the exhaust are blocked;
4. There is a hole for connection. When hang the laser lighting, be sure the
cable can support 10 times of the lighting weight;
5. The laser lighting should be fixed;
6. It is essential to be earthed well for the sake of safety.
DMX512
This laser light is controlled by the standard DMX. Please connect
controlling panel with the lighting as following
©Copyright Lotronic 2011
FUNCTION
#9 #10
X 1 SOUND ACTIVE
X 1 AUTO MODE
0 DMX/SLAVE
Before using the DMX512 controller, you should set the channel address.
can be set between 001~511. Every binary address switch has a digital no.
Please refer to：
No. Digital No.
1st 1
2nd 2
3rd 4
4th 8
5th 16
DMX Control Parameter Chart
DMX512
Channel No
fig.
0~69
70~139
Channel 1
Control
140~209
mode
210~255
Pattern
0~33
Channel
Selection
2
34~255
Channel
Strobe 0-255
3
Channel
Spot and 0-255
4
line
1~160
Horizontal
161~190
move
Channel
191-220
5
221-255
1~160
161~190
Channel
Vertical
191~220
6
move
221~255
It
No. Digital No.
6th 32
7th 64
8th 128
9th 256
10th Function switch
Content
Shut off
Sound control
Auto play
manual
Static pattern
Dynamic Geometric
pattern
8 grade speed
0-255)/30=0-8do
From line to spot effect
Manual
From left to right move
From right to left move
Right and left in-phase
move
Manual
From down to up
From up to down
Up and down in-phase
move
2