Cleaning And Maintenance; Technical Specifications - HQ Power VDSSM3 Mode D'emploi

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.

8. Technical Specifications

Amplifier
Subwoofer
Satellite Speakers
Line In
Parallel Out
Input Impedance
Speaker Out
Active Crossover
Crossover Frequency
Subwoofer
Speaker
Nominal Impedance
Frequency Response
SPL (1W/1m)
Max. SPL
Dispersion
Weight
Two-Way Speaker
Speaker
Input Connector
Nominal Impedance
Frequency Response
SPL (1W/1m)
Max. SPL
Crossover Frequency (Passive)
Weight
For more info concerning this product, please visit our website www.hqpower.com
The information in this manual is subject to change without prior notice.
VDSSM3
1 x 500W / 8 @ 1% THD
2 x 120W / 8 @ 1% THD
XLR female
XLR male
48k
Speakon (order code NL4FX)
®
130Hz – 24dB/octave
1 x 15"
8
40Hz – 130Hz ± 3dB
102dB
128dB @ 10% THD
omnidirectional
42kg
2 x 8" woofer + 1 x 1.34" titanium diaphragm
Speakon (pin 1+ and 1-)
®
8
130Hz – 19kHz ± 3dB
97dB
119dB @ 10% THD
2.5kHz – 12dB/octave
8kg (1 pc)
7 VELLEMAN