Cleaning And Maintenance; Technical Specifications - HQ Power HQSA1001 Mode D'emploi

5.3 USB Player
6. Operation
1. Turn all volume knobs to their minimum position.
2. Connect the power cord to the mains.
3. Connect a cable from the audio source to the speaker input.
4. Switch on the speaker.
5. Slowly increase the volume to the desired level.
7.

Cleaning and Maintenance


Before any maintenance, you must switch off and unplug the device. Let it cool down.

Clean with a moist cloth. Do not clean with water or submerse in water or any other liquid.

Never use solvents like gasoline, isoamyl, acetate, toluene, etc.
8.

Technical Specifications

power supply
fuse
total amp power
bass power
high power
power factor
woofer
size
coil size
horn driver
frequency
response
sensitivity
dimensions (mm)
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 04 – 08/01/2018
HQSA1001/HQSA1002/HQSA1003/HQSA1004
MENU MP3 player
repeat mode
MODE USB/SD Card selector
EQ equalizer
FD- last folder
FD+ next folder
last track
next track
play/pause
HQSA1001
100 W
85 W
15 W
0.79
8"
1.5"
1"
70 Hz to 17 kHz
105 dB
252 x 201 x 373
6.8 kg
HQSA1002
115/230 V~, 50/60 Hz
T2A, 250 V
120 W
100 W
20 W
10"
2"
1.35"
65 Hz to 17 kHz
108 dB
299 x 242 x 463
9.4 kg
5
HQSA1003
250 W
200 W
50 W
0.77
12"
2.5"
1.35"
55 Hz to 17 kHz
110 dB
388 x 306 x 594
15 kg
HQSA1004
300 W
250 W
50 W
15"
3"
1.75"
50 Hz to 17 kHz
112 dB
450 x 347 x 692
19.4 kg
©Velleman nv