Installation Of The Camera - Marmitek OBSERVER 25 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION

INSTALLATION OF THE CAMERA

Permanent installation using camera bracket:
CAUTION : Keep camera installed away from direct sunlight. Also avoid places where humidity is high or where the camera is not protected from
rain. The mounting bracket must be attached to a structural object such as a wall stud or ceiling rafter using suitable fastener. Do not touch the
glass of the lens. This could damage the delicate coating on its surface. If the lens has to be cleaned, use a special lens cleaning tissue available at
any good camera store.
OBSERVER25
1. Attach the camera bracket using 4 screws.
2. Attach the camera onto the pedestal and tighten the thumb screw.
7

Publicité

Table des Matières
loading

Table des Matières