Christopeit Sport EM 5 Notice De Montage Et D'utilisation page 19

Step 8:
Place the steering tube (12) in the locator provided for it in the main
frame (1). Ensure that the cable connections made in step 8 are not
squashed. When puttin the steering tube in place, push the former
slowly down into the locator in the main frame. Screw the handlebar
upright tube (12) onto the base frame (1) with the screws (17),
spring washers (8) and washers (7).
Step 9:
Guide the preassembled handlebar unit (26) through the upper part
of the handlebar post (12) and close the bracket of handlebar holder.
Screw the handlebar (26) in desired position at the handlebar post
(12) with washer (7) and handlebar screw (27).
Step 10:
Place the computer on the plate provided for it on the handlebar
upright tube (12) and attach it with the screws (30). Push the
computer onto the provided plate on the handlebar support tube
(12). Push the plug of the cable harness (29) projecting from the
handlebar unit into the associated socket of the computer (31).
Step 11:
Attach the power
1.
Please insert the plug of adaptor (16) to the jack (15) of chain
guard.
2. Please insert the plug of adaptor (16) to the jack of wall power.
Step 12:
Checks
1.
Check the correct installation and function of all screwed and
plug connections.
Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine
at a low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these
may be required for repairs or spare parts orders becoming necessary
later.
19