Installing And Connecting The Refrigerator - Dometic CRE Série Instructions De Montage

CRE
6.2 Control elements
No. in
fig. 4, page 3
1
2
3
4
5
6
7
7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the device is powered by the mains, ensure that the voltage supply has
a residual current circuit breaker.
A
NOTICE!
•
The device can be for tilted sideways up to 30° for only a short period
of time. When setting up the refrigerator, note that it must be
fastened to take account of this. If you have any questions regarding
installation, consult your specialist dealer.
•
Install the refrigerator so that the warm air produced can easily
escape (either upwards or to the sides, fig. 5, page 4).
•
The device is designed for ambient temperatures between +16 °C
and +38 °C.
EN
Explanation
IR sensor for switching the interior light
Red LED: Fault indication
LED Blue: Compressor is running
LED Orange: Compressor is off
On/off button
Inner lighting
Temperature selection button
LEDs: Temperature levels

Installing and connecting the refrigerator

19