Dometic CRE Série Instructions De Montage page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
CRE
➤ Connect the red cable (fig. e rd, page 10) to the positive terminal of the battery.
➤ Connect the black cable (fig. e bk, page 10) to the negative terminal of the
battery.
7.8
Connecting the refrigerator to AC voltage
D
DANGER! mortal danger!
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
If you are operating your refrigerator on board a boat with an
AC power supply using a shore connection, you must install a
residual current circuit breaker between the AC power supply and
the refrigerator.
Seek advice from a trained technician.
You can connect the refrigerator to an AC power if you use the MPS35 rectifier
(accessory).
The MPS35 rectifier features a priority circuit which conserves the battery
connected. When an power supply is used, the rectifier automatically switches from
battery to mains operation.
When disconnected from the AC power supply, the rectifier automatically switches
back to battery operation. Mains operation via the rectifier always takes priority over
battery operation.
Proceed as follows when you connect the refrigerator to the AC supply:
➤ Attach the rectifier on the back of the refrigerator.
➤ Connect the rectifier to the battery as shown in fig. f, page 10:
– Red/black cable: positive battery terminal
– Black cable: negative battery terminal
➤ Connect the rectifier to the refrigerator (fig. f 2, page 10):
– Red cable: positive rectifier terminal
– Black cable: negative rectifier terminal
➤ Plug the connector into the AC socket (fig. f 1, page 10).
EN
Installing and connecting the refrigerator
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cre 0050Cre 0065Cre 0080

Table des Matières