Stihl BGE 61 Notice D'emploi page 25

Masquer les pouces Voir aussi pour BGE 61:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
Electrical Connection.
Reduce the risk of electric shock:
Voltage and frequency of the
machine (see rating plate) and the
voltage and frequency of your
power supply must be the same.
Check the connecting cord, plug
and extension cord for damage.
Never use damaged cords,
couplings and plugs or connecting
cords that do not comply with
regulations.
Always connect the power tool to a
properly installed wall outlet.
Check that the insulation of the
power cord, extension cord, plug
and coupling is in good condition.
Never touch the mains plug, power
cord, extension cord or electrical
connections with wet hands.
Position the connecting and extension
cords correctly:
Check minimum cross section of
wires (wire gauge) – see
"Connecting to Power Supply".
To reduce the risk of stumbling,
position and mark the connecting
cord so that it cannot be damaged
or endanger others.
Using unsuitable extension cords
can be dangerous. Use only
extension cords approved for
outdoor use which are labeled as
such and have the appropriate wire
gauge.
The plug and coupling of the
extension cord must be water-proof
and must never be immersed in
water.
BGE 61, BGE 71, BGE 81, SHE 71, SHE 81
Do not chafe on edges, pointed or
sharp objects
Do not squeeze through gaps in
doors or windows
If cords are twisted – unplug the
power tool and straighten them out
Always unwind the extension cord
completely from the cable drum to
reduce the risk of fire from
overheating.
Using the Blower
Your blower is designed for one-handed
operation. It can be carried by the
control handle in either the right or left
hand.
Always hold the power tool firmly in your
hand.
Walk slowly forwards as you work –
observe the nozzle outlet at all times –
do not walk backwards – risk of
stumbling.
WARNING
To reduce the risk of injury, operate the
unit only with a properly mounted blower
tube.
The round nozzle is particularly suitable
for use on uneven surfaces (e.g. fields
and lawns).
The fan nozzle (either included with
power tool or available as special
accessory) produces a broad and
powerful airstream at ground level. It can
be aimed and controlled very accurately.
This nozzle is highly effective for blow-
sweeping sawdust, leaves, grass
cuttings, etc. on flat surfaces.
Using the Vacuum Attachment
For specific assembling instructions,
see appropriate chapter in this manual.
Your vacuum shredder is designed for
two-handed operation. Hold and operate
the power tool with your right hand on
the control handle and your left hand on
the assist handle (union nut).
English
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bge 71Bge 81She 71She 81

Table des Matières