6.3
Plungers' Disc Replacement
The plungers' disc (9, fig. 1) are subject to wear due to rubbing against the inner wall of the cartridge (20, fig. 1).
Plungers' disc that are much worn may damage the foil bag in the supporting cartridge (20, fig. 1).
Replacement plungers' disc are therefore available as a spare part.
The tool required for the replacement and a description of the procedure are enclosed with the spare part.
6.4
Unit Cover Replacement
The unit cover (8, fig. 1) is available as a spare part.
The tool required for the replacement and a description of the procedure are enclosed with the spare part.
6.5
Fuse Replacement
Before replacing the fuse, disconnect the unit from the main power supply by unplugging the power cord
GB
from the wall outlet.
- 8 -
Only replace fuses with new ones that have the same rating as those being replaced.
Refer to the "Technical Specifications" section.
Never use fuses with a higher rating.
• Unplug the unit.
Pull the fuse holder (17) out.
•
•
Remove the defective fuse and insert a new one.
• Push the fuse holder back in, making sure it is completely seated.
6.6
Spare Parts
Please refer to the enclosed spare parts list for the order numbers of spare parts.
Please state the item number and serial number of the unit in addition to the desired order number when ordering
spare parts.
Serial number and date of manufacturing are shown on the type plate of the unit.
Accessories and Spare Parts
66033825 DYNAMIX WALL MOUNT (wall mount)
66034326 DYNAMIX UK POWER CORD 230 V (mains cable United Kingdom)
66034327 DYNAMIX CH POWER CORD 230 V (mains cable Switzerland)
66034592 DYNAMIX EU POWER CORD 230 V (mains cable EU)
66041021 DYNAMIX SPARE PART COVER NEW (NEW FORM) (spare part – unit cover new shape)
66032128 DYNAMIX SPARE PART PLUNGER DISC (spare part – plungers' disc)
66034329 DYNAMIX SPARE PART FUSE EU 230 V (spare part – fuse 230 V)
66047093 DYNAMIX SPARE PART BASE PLATE NEW (NEW COLOR) (spare part – unit plate new color)
66035030 DYNAMIX SPARE PART BASE FEET 4pcs (spare part – unit feet 4pcs)
66035051 DYNAMIX SPARE PART RUBBER STAMP (spare part – catch)
7.
Scope of Supply
1
Dynamix speed Mixing unit, 230 V, 50 Hz.
1
Power cord.
1
Instructions for use.
8.
Delivery Form
Item no.: 66045779 – Dynamix speed EU Standard, 230 V, 50 Hz.
(17)
fig.10