Introduction; Symbols; Ec Declaration Of Conformity - Heraeus Dynamix speed Mode D'emploi

1.

Introduction

1.1

Symbols

The following symbols are employed in these instructions and on the unit itself:
On the unit:
Adhere to the instructions for use!
In these instructions:
"Danger"
Serious risk of injury!
Electrical current
This indicates a hazard due to electrical current.
Attention
Failure to observe the associated information can result in damage to the unit.
Note
GB
This provides the operator with useful information to make working with the unit easier.
Please observe the operating time.
- 2 -
After 2 minutes of operation, you must pause for at least 5 minutes.
Please observe a pause of 2 hours after the extrusion of 3 complete cartridges (approx. 30 impressions
with a medium-size tray) in immediate succession. During the pause the device can remain switched on.
The unit complies with current EU directives.
Within the EU, this device is subject to the provisions of the WEEE directive.
• Required actions, correct order
○ Reaction
– Listing
Other symbols are explained as they occur.
1.2

EC declaration of conformity

We, Heraeus Kulzer GmbH, hereby declare that the present product:
Dynamix speed
Item nos.: 66045779
complies with the following European directives:
− 93/42/EEC, Medical Devices Directive